Z Robotics
← Back to blog18/11/2026

Large-format CNC milling: 8 m machine and 24 m laser frames

Large-format CNC milling: 8 m machine and 24 m laser frames

Large-format CNC milling means milling parts too big for ordinary milling machines, such as welded machine frames, beams, base plates and moulds, on a gantry mill with long travel. At Z Robotics (Di An, Ho Chi Minh City) we mill on a WP4028 gantry with X 4,400 × Y 2,800 × Z 1,500 mm of travel. Parts longer than the travel are machined by re-clamping. This article collects recent projects with real photos from our workshop, so you can see the kind of parts we take on and how we work. See more on our large-format CNC milling page.

Projects at a glance

PartSizeMain work
Machine frame2.6 × 8 mMilling rail seats and side faces; longer than X travel, so re-clamped
CO2 laser machine frame2 × 4 mMilling mounting faces on the welded frame
Modular fiber laser frame3 × 24 mSplit into sections for machining, then assembled into one long frame
Steel block for a mould700 × 1,200 × 400 mmSquaring all six faces
Mould base plateTo drawingFace milling
Sizes are overall part sizes. We do not name our clients.

Machine frame 2.6 × 8 m: nearly twice the machine travel

This frame is 8 m long, nearly twice the 4,400 mm X travel of the WP4028, so it cannot be milled in one setup. We mill it with dedicated fixtures and 2–3 re-clamping moves along its length. The key requirement is that the linear-guide seats stay in line along the whole frame, because the rails mounted there directly affect the accuracy of the finished machine.

The 2.6 × 8 m machine frame on the gantry mill
The 2.6 × 8 m machine frame on the gantry mill

CO2 laser machine frame 2 × 4 m

A 2 × 4 m frame fits within the X 4,400 × Y 2,800 mm travel, so unlike the 8 m frame it does not need re-clamping along its length.

The 2 × 4 m CO2 laser frame on the gantry mill table
The 2 × 4 m CO2 laser frame on the gantry mill table

Modular fiber laser frame 3 × 24 m

The 24 m frame is designed in sections. We milled the sections on the gantry mill, and they are then assembled into one long frame. For the rails to stay straight after assembly, the rail seats and joint faces between sections have to be machined consistently.

Beams of the modular fiber laser frame on the gantry mill
Beams of the modular fiber laser frame on the gantry mill

Moulds: a 700 × 1,200 × 400 mm steel block and base plates

The 700 × 1,200 × 400 mm steel block was squared on all six faces as a mould blank. Squaring all six faces means the faces must be flat, parallel and perpendicular to each other, so that later mould machining has true datums. For mould base plates, we face mill to the drawing.

A mould base plate clamped on the gantry mill table
A mould base plate clamped on the gantry mill table
Face milling cutter skimming the surface of the mould base plate on the WP4028 gantry mill
Face milling cutter skimming the surface of the mould base plate on the WP4028 gantry mill

A large-diameter face mill takes finishing passes, controlling flatness and parallelism across the entire base plate before handing over to the client for subsequent machining.

Mould base plate surface after finish face milling at the Z Robotics Di An workshop
Mould base plate surface after finish face milling at the Z Robotics Di An workshop

What these projects have in common

A vertical tool cannot reach the side faces of the frame. We fit a right-angle head to the spindle to mill the sides without turning the frame over. Every time a large frame is turned over, it costs more time for lifting, clamping and re-indicating.

A right-angle head milling the side face of the frame
A right-angle head milling the side face of the frame
A freshly milled rail seat on a beam-type machine frame
A freshly milled rail seat on a beam-type machine frame

1. Parts longer than the travel are machined with dedicated fixtures and 2–3 re-clamping moves.

2. A right-angle head mills side faces, so large parts are turned over less often.

3. On long parts, thermal growth affects measurement; read more: milling long parts without distortion.

Frequently asked questions

What size of part can Z Robotics mill? — In one setup the part must fit within the WP4028 travel of X 4,400 × Y 2,800 × Z 1,500 mm. Parts 8–10 m long are milled with dedicated fixtures and 2–3 re-clamping moves.

How is a 24 m frame machined? — The frame is designed as a set of sections. Each section is milled separately, then assembled.

Does a welded frame need stress relief before milling? — Stress relief after welding and before finish milling is worth considering, so the frame distorts less after machining. Send the drawing and we will discuss a suitable sequence.

What do you need for a quote? — A 2D or 3D drawing, the material, the quantity and the faces to machine. Without a drawing, photos and overall sizes are enough for a first look.

Where is the workshop? — The Z Robotics workshop is in Di An, Ho Chi Minh City, convenient for clients in Ho Chi Minh City (including former Binh Duong), Dong Nai and the rest of Southern Vietnam.

Have a large part to machine? Send us your drawing.

Contact Z Robotics

We would be delighted to accompany you in your mechanical machining and automation projects. For consultation, please contact us:

🏢 Head office: 118/137 Phan Huy Ich Street, Tan Son Ward, Ho Chi Minh City

📍 Business location: 335 DT743B Street, Dong Tac, Di An, Ho Chi Minh City

📞 Phone: Mr. Thanh — 0973 040 871